ATLAS UNI-GRUNT ULTRA – deep-penetrating priming emulsion
DescriptionSubstrates primed with ATLAS UNI GRUNT ULTRA have decreased and unified absorptivity, which ensures adhesion of the following layers.
Emulsion penetrates into the substrate, bonds aggregate grains and reinforces primed layer.
Ultra efficiency – one 5 kg packaging of ATLAS UNI-GRUNT ULTRA is sufficient for priming:
– 50 m2 of floor prior to the application of self-levelling mass
– 115 m2 of plaster prior to the application of top coat, installation of ceramic cladding,
– 180 m2 of substrate prepared for painting.
Special pigment contained in product colours the substrate, which enables to control the work progress, while the primer is still wet and when it dries – the colour does not decrease ability for covering of painting coats.
The main characteristics– significantly improves adhesion to the substrate
– decreases and unifies substrate absorptiveness
– underneath adhesives, plasters, top coats, paints
The main parametersEmulsion density: approx. 1,0 g/cm³
Substrate and ambient temperature during work: from +5 ºC up to +30 ºC
Further work after priming (depending on substrate type):
– after 15 minutes – plasters, silicate hollow blocks, aerated concrete blocks
– after 2 hours – self-levelling floors
Emulsion penetrates into the substrate, bonds aggregate grains and reinforces primed layer.
Ultra efficiency – one 5 kg packaging of ATLAS UNI-GRUNT ULTRA is sufficient for priming:
– 50 m2 of floor prior to the application of self-levelling mass
– 115 m2 of plaster prior to the application of top coat, installation of ceramic cladding,
– 180 m2 of substrate prepared for painting.
Special pigment contained in product colours the substrate, which enables to control the work progress, while the primer is still wet and when it dries – the colour does not decrease ability for covering of painting coats.
The main characteristics– significantly improves adhesion to the substrate
– decreases and unifies substrate absorptiveness
– underneath adhesives, plasters, top coats, paints
The main parametersEmulsion density: approx. 1,0 g/cm³
Substrate and ambient temperature during work: from +5 ºC up to +30 ºC
Further work after priming (depending on substrate type):
– after 15 minutes – plasters, silicate hollow blocks, aerated concrete blocks
– after 2 hours – self-levelling floors
