Most important features
- highly resistant to corrosive media
- UV-resistant
- flexible
- high tensile strength
Product description
Increase waterproofing around areas where the use of ATLAS WODER waterproofing alone is not sufficient pro-tection against moisture – especially in the corners of wet and damp areas, along wall-floor junctions, along the course of expan-sion joints (including construction joints) and work gaps. They form a complete set for sealing wet areas:
• ATLAS HYDROBAND 3G tape – in two widths: 125 mm (with scaling and perforation) and 250 mm (without scaling and perforation), for sealing wall and floor subfloor edges and ex-pansion gaps,
• ATLAS HYDROBAND 3G internal corner – a heat-formed ele-ment made of sealing tape, for sealing internal corners of rooms,
• ATLAS HYDROBAND 3G external corner – a heat-formed ele-ment made of sealing tape, for sealing external corners of rooms.
Protects against moisture arising inside buildings – plasters and screeds in wet rooms (bathrooms, baths, showers, kitchens, washing facilities), especially in the wet zones of these rooms – around showers, wash basins, bath tubs, sinks, etc.
Protect against moisture generated outside – balconies and terraces, cellars, water tanks, underground garages, manholes, etc.
They are recommended for the protection of elements particularly exposed to damage in contact with moisture – gypsum products (boards, plaster) and anhydrite products, cellular concrete, OSB, etc.
Type of substrates to be sealed – cement, cement-lime and gypsum plasters, cement and anhydrite screeds, concrete, rein-forced concrete and brick, hollow block and block masonry ele-ments, plasterboard, OSB, etc.
• ATLAS HYDROBAND 3G tape – in two widths: 125 mm (with scaling and perforation) and 250 mm (without scaling and perforation), for sealing wall and floor subfloor edges and ex-pansion gaps,
• ATLAS HYDROBAND 3G internal corner – a heat-formed ele-ment made of sealing tape, for sealing internal corners of rooms,
• ATLAS HYDROBAND 3G external corner – a heat-formed ele-ment made of sealing tape, for sealing external corners of rooms.
Protects against moisture arising inside buildings – plasters and screeds in wet rooms (bathrooms, baths, showers, kitchens, washing facilities), especially in the wet zones of these rooms – around showers, wash basins, bath tubs, sinks, etc.
Protect against moisture generated outside – balconies and terraces, cellars, water tanks, underground garages, manholes, etc.
They are recommended for the protection of elements particularly exposed to damage in contact with moisture – gypsum products (boards, plaster) and anhydrite products, cellular concrete, OSB, etc.
Type of substrates to be sealed – cement, cement-lime and gypsum plasters, cement and anhydrite screeds, concrete, rein-forced concrete and brick, hollow block and block masonry ele-ments, plasterboard, OSB, etc.
Main properties
ATLAS HYDROBAND 3G consists of three layers:
- – two outer, made of alkali-resistant, non-woven polypropylene,
- – centre, made of an age-resistant, thermoplastic elastomer.
- This arrangement of layers ensures reliable sealing and optimal adhesion of the tape to the waterproofing.
High chemical resistance to aggressive environments
- – to alkalis and diluted acids.
The ability to extend the tape considerably in the trans-verse direction
- – it is flexible – it remains watertight even under considerable deformation, making it ideal for sealing the joints of two structural elements that are in contact with each other but work differently, e.g. wall and floor edges.
High tear strength
- – thanks to the use of highly resistant materi-als: polypropylene knitted fabric and thermoplastic elastomer.
The ATLAS HYDROBAND 3G tape together with the ATLAS WODER waterproofing product line form an excellent wa-terproofing system with very high tightness and adhesion to the substrate. Perfect cooperation of the tape with ATLAS WODER line products is ensured by:
- – the extensive mechanical adhesion of the waterproofing tape coating,
- – high wettability of the tape surface by the product itself.
For use with waterproofing:
- – ATLAS WODER E,
- – ATLAS FAST-DRYING LIQUID FOIL,
- – ATLAS WODER DUO,
- – ATLAS WODER DUO EXPRESS,
- – ATLAS WODER S,
- – ATLAS WODER SX.
Main parameters
- Overall thickness – approx. 0.7 mm
- Temperature resistance – from -30° C to + 90° C
- Maximum internal rupture pressure – 1.5 bar
- UV resistance (500 h) – resistant
